Custom Roll Cage Front & Rear Windshields - FREE QUOTE

Custom Front Windshield
for SDR Cage Shown

 

KEEP THAT HEAD TURNER TURNING HEADS! 🔥 🤘🔥

We see you. We got you. 👊 Custom cages for your machine are one of the ultimate upgrades. Why not take it to the next level with Dirt Warrior Accessories custom front & rear windshields to fit your custom roll cage?

• PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility! If you aren't local, that's ok, make a trip to one of the most beautiful areas on the planet to SXS and we'll get you taken care of and you'll have a blast riding at the same time! 😁

We will fabricate your windshields to fit the new geometry of your cage, providing even more protection for yourself and your passengers. Mother Nature won't have a chance to rain on your parade.

We can work with just about all custom cage designs and manufacturers including; Pro Armor, UTV Pros, SDR, VooDoo, Vent, RSK, Cage WRX, and more!

Wind, dust, cold, snow, rain, whatever! We got you covered using the same world famous DWA fabrication process that we have use for the 1000's and 1000's of windshields we have already fabricated, manufactured, produced, sold and seen enjoying the endless trails of this glorious planet. 🤘

Have any other ideas? Let us know! And while you're at it, you might as well customize the color and tint. 😎 Let's get the process started. Use the order menu above to give us the details and what you're looking for and we'll get back to you with a price quote to give your machine the look you want. No credit card or payment information is required at this time. Let's go!

The aluminum frames are powder coated in textured black making it more scratch resistant than standard smooth powder coats. Standard Textured Black with accent colored emblem is stocked. If you would like a custom color, allow an additional 2 weeks.

Customize with a wide range of stock and custom colors. Or simply choose from the common colors available in the emblem color choices selection menu above!

Click For Larger Image

Don't forget to stock up
on your DWA SWAG!

Click To Shop Now

If you have any questions about colors or fitment, message us on the Contact DWA page.

PLEASE NOTE: Each windshield was templated by our team of fabricators using the best technology and equipment to get the best fit possible.

The nature of how these UTVs & SXSs are manufactured and assembled at the factory, no two machines are ever exactly alike. That is why we leave a minimum tolerance to accommodate for each machine's slight differences. This does not convert your machine into a submarine, expect minimal to no water entering through your windshield where it links to the roof, hood or a similar point.

NOTE:
LOWER DOORS/PANELS NOT INCLUDED
UTV/SXS NOT INCLUDED
PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility. 

Have a DiRtY DAY in Style!

DIRT WARRIOR UTV & SXS ACCESSORIES

Custom Front & Rear Windshields

FITMENT

PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility. 

• Polaris Custom Roll Cages

• Can-Am Custom Roll Cages

• Kawasaki Custom Roll Cages

• Honda Custom Roll Cages

• Yamaha Custom Roll Cages

• Textron Custom Roll Cages

• Mahindra Custom Roll Cages

• Arctic Cat Custom Roll Cages

• CFMoto Custom Roll Cages

PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility. 

INSTALLATION

PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility. 

GENERAL FRONT WINDSHIELD
INSTALLATION INSTRUCTIONS PDF - CLICK HERE

TOOLS NEEDED FOR INSTALLATION:

• 11 mm or 7/16" Wrench
• #3 Phillips Screwdriver

OPTIONAL: Screw Gun with 11 mm or 7/16" Socket and #3 Phillips Tip

GENERAL REAR WINDSHIELD
INSTALLATION INSTRUCTIONS PDF - CLICK HERE

TOOLS NEEDED FOR INSTALLATION:

• 11 mm or 7/16" Wrench
• #3 Phillips Screwdriver

OPTIONAL: Screw Gun with 11 mm or 7/16" Socket and #3 Phillips Tip

Dirt Warrior Accessories' YouTube installation video playlists.

If you have any questions about front windshield installation, please message us on the Contact DWA page.

OTHER PRODUCTS

More Awesome DWA Products - CLICK HERE

DWA Swag - CLICK HERE

RV Toy Hauler Patio Conversion Cable Kit - CLICK HERE

MANUFACTURING

PLEASE NOTE: We do not take custom measurements over the phone. You will need to bring your SXS to the DWA facility. 

Lead time for custom roll cage windshield fabrication may be 4-6 weeks depending on manufacturing schedule, demand, and custom options. 

Click here for updated manufacturing lead and shipping time information.